挑坎体型对下游雾化影响的试验研究          下载免费PDF全文

练继建  冉聃颉  何军龄  张紫畅 《水科学进展》2020,31(2):260-269

以解决挑流消能工在泄洪期间为提高消能率而加重下游雾化问题为目标,探究不同体型挑坎的下游雾化特性。通过水力学模型试验,对典型的非对称舌型坎、标准舌型坎、扭面贴坎和连续坎的下游水舌风分布、下游溅水雨强和不同液滴体积分布以及挑流水舌水力特性与冲刷特性进行了研究。研究表明:①各种工况下,非对称舌型坎、标准舌型坎、扭面贴坎的下游水舌风风速均大于连续坎。②对于非对称舌型坎,其溢洪道轴线左侧溅水强度大于右侧,其雨强左右两侧峰值差值最大为5.625 g/(m 2·min);对于扭面贴坎,其溢洪道轴线右侧溅水强度更大,其雨强左右两侧峰值差值最大为45.125 g/(m 2·min)。③随着距离水舌入水点长度增大,大粒径水滴数量和体积占比均剧烈下降;连续坎和舌型坎的挑宽均随着角度的增加而增加;冲坑深度随着角度的减小而增大。④在挑坎合适边墙侧设置扭面贴角能改善下游雾化危害,同时适当增加挑角可以减弱下游冲刷破坏。  相似文献   

基于新型单相MICP技术改性黏性土力学特性的试验研究     

张宽  唐朝生  刘博  张天生  程青  施斌 《工程地质学报》2020,28(2):306-316

微生物诱导碳酸钙沉积(MICP)是一种绿色低碳的新型土体改性技术.该技术当前主要适用于渗透性较好的砂土,普遍使用两相处理方法,即菌液和胶结液分开施用.然而,对于渗透性相对较差的黏性土,传统的两相处理方法难以适用.为此,引入新的单相胶结方法,即菌液和胶结液混合施用,通过调节溶液的初始pH值为细菌水解作用提供窗口期,避免微生物絮凝阻塞孔隙,使混合液均匀分布于土体一定深度范围内,从而达到显著提升胶结效果的目的.利用喷洒法将混合液喷洒至土体表层进行MICP处理,处理完成后使用超微型贯入仪SMP-1测试土体表层不同深度处的结构强度,分析土体力学特性的空间差异,对土体的胶结效果进行定量评价.此外,探究了胶结液浓度(0.2M、0.5M和1.0M)及胶结方法(调节pH与否)对于土体结构强度及MICP改性效果的影响.结果表明:采用单相MICP技术对黏性土进行改性,能够显著提高其结构强度,具有较好的适用性;在不高于1.0 M的胶结液浓度范围内,黏性土的胶结效果随着胶结液浓度增加而提升;相比较而言,调节pH的单相胶结方法对于提升土体胶结的深度和均匀性有明显积极作用.新型单相MICP技术简单易行,能够节约成本,在黏性土表层加固方面具有潜在推广应用价值.  相似文献   

西南某岩溶区地下水系统示踪试验与解析     

张浪  李俊  潘晓东  黄晓荣  彭聪 《中国岩溶》2020,39(1):42-47

以西南某典型岩溶区为例,解析示踪试验在岩溶管道连通性以及获取水文地质参数中的应用。选择落水洞为投放点,分别从落水洞西侧和东侧寻找地下水出露点作为接收点,判别落水洞地下径流的实际去向以及落水洞与接收点之间的水力联系。结合Qtracer2软件对示踪试验成果进行定量解析,确定示踪剂回收率、地下水平均流速、最快流速,估算出岩溶管道结构特征和水文地质参数。结果表明:落水洞与接收点JS01、JS03之间不存在直接水力联系;落水洞与接收点JS02存在水力联系且岩溶管道极为发育,含水介质不均匀,地下水运移路径较为通畅,为典型的紊流流态;落水洞地下径流的主要方向是由西向东,但在丰水期雨量较大期间,接收点JS04能够接收到荧光素钠,说明丰水期水位上涨后两者间会有水力联系,导致部分水量向落水洞西侧排泄。  相似文献   

Two-stage permutation tests for determining homogeneity within a spatial cluster     

Qiliang Liu  Wenkai Liu  Min Deng  Yaolin Liu 《International journal of geographical information science》2019,33(9):1718-1738

The discovery of spatial clusters formed by proximal spatial units with similar non-spatial attribute values plays an important role in spatial data analysis. Although several spatial contiguity-constrained clustering methods are currently available, almost all of them discover clusters in a geographical dataset, even though the dataset has no natural clustering structure. Statistically evaluating the significance of the degree of homogeneity within a single spatial cluster is difficult. To overcome this limitation, this study develops a permutation test approach Specifically, the homogeneity of a spatial cluster is measured based on the local variance and cluster member permutation, and two-stage permutation tests are developed to determine the significance of the degree of homogeneity within each spatial cluster. The proposed permutation tests can be integrated into the existing spatial clustering algorithms to detect homogeneous spatial clusters. The proposed tests are compared with four existing tests (i.e., Park’s test, the contiguity-constrained nonparametric analysis of variance (COCOPAN) method, spatial scan statistic, and q-statistic) using two simulated and two meteorological datasets. The comparison shows that the proposed two-stage permutation tests are more effective to identify homogeneous spatial clusters and to determine homogeneous clustering structures in practical applications.  相似文献   

Test and analysis of reinforced concrete (RC) precast shear wall assembled using steel shear key (SSK)     

Shao-Dong Shen  Peng Pan  Qi-Song Miao  Wen-Feng Li  Run-Hua Gong 《地震工程与结构动力学》2019,48(14):1595-1612

Reinforced concrete (RC) precast shear walls are extensively applied in practical engineering, owing to their fast construction speed. However, because of the transport conditions, RC precast shear walls have to be separated into small wall segments during the factory prefabrication procedure before being assembled on site. Typically, wet-type jointing methods are adopted to link the segments, which is time-consuming and results in unreliable post-pouring area strength. To overcome this problem, the novel scheme of the steel shear key (SSK) featuring steel shear panels and combined fillet and plug welding is proposed. Three RC precast shear wall specimens with different linking strength, termed as weakened SSK wall, standard SSK wall, and strengthened SSK wall, respectively, and an integrated shear wall specimen were designed. Quasi-static cyclic loading was applied to investigate the specimens' dynamic properties. The test results suggest the prefabricated wall segments equipped with SSKs showed reliable stiffness and bearing capacity and were improved in energy dissipation ability, compared with conventional shear walls. As the shear stiffness and number of equipped SSKs increased, the specimens exhibited higher strength, but their ductility and energy dissipation were slightly decreased. Most importantly, the standard SSK wall specimen could achieve satisfactory bearing capacity and deformability and is thus recommended for precast building structures. Finite element method (FEM) models were established to validate the test results, and parametric study analysis was conducted based on the coupling ratio of the SSK walls. Finally, an appropriate coupling ratio range is recommended for practical engineering applications.  相似文献   

Identification of modal parameters of a 600-m-high skyscraper from field vibration tests     

Junwei Zhang  Qiusheng Li 《地震工程与结构动力学》2019,48(15):1678-1698

Accurate prediction of the dynamic responses of a high-rise building subjected to dynamic loads such as earthquake and wind excitations requires the information of its structural dynamic properties such as modal parameters including natural frequencies and damping ratios. This paper presents the identification results of the modal parameters based on field vibration tests on a 600-m high skyscraper. A set of tests, including ambient vibration test (AVT) and free vibration test (FVT), were conducted on the skyscraper to identify its modal parameters. Firstly, this paper presents and discusses the modal parameters of the skyscraper assessed by several identification methods applied to the AVT measurements. These methods include the wavelet transform (WT) method, the stochastic subspace identification (SSI) method, and the random decrement technique (RDT). Secondly, an active mass damper (AMD) system with total mass 1000 tons equipped into the skyscraper was used to excite the building for estimation of the modal parameters by FVT. Thirdly, this paper presents observations on the structural dynamic behavior of the skyscraper with the operation of the AMD system during a typhoon event. The field measurement results show that the AMD system functioned efficiently for suppression of the wind-induced vibrations of the skyscraper during the typhoon. This paper aims to further understand the structural dynamic properties of super-tall buildings and provide useful information for structural design and vibration control of future skyscrapers.  相似文献   

固结时间对软土动力特性影响的试验研究     

兰景岩  王延伟  曹振中  刘娟 《震灾防御技术》2019,14(4):742-749

固结试验是研究软土动力特性的重要环节，固结时间是影响软土动力特征参数的重要因素。围绕岩土工程及科研工作中对动三轴试验中固结时间影响规律的认识较为模糊的问题，拟对天津滨海软土开展动三轴平行试验，分别采用8h、12h、24h、48h进行固结，针对软土的最大动剪切模量G_max、最大阻尼比λ_max及动剪切模量比G_d/G_max和阻尼比λ随动剪切应变γ_d的变化规律，分析固结时间对软土动力特性参数的影响。试验结果表明:G_max、λ_max、G_d/G_max-γ_d曲线、λ-γ_d曲线受固结时间的影响较为显著。G_d/G_max-γ_d曲线随着固结时间的增加而减小。阻尼比试验结果表明动剪切应变存在明显的分界点，分界点以下，中长期固结时间所得阻尼比较大，而分界点以上，短期固结时间所得阻尼比较大。  相似文献   

基于新型高频声学多普勒流速剖面仪的河口近底部边界层观测初探     

兰庭飞  吴昊  唐杰平  李占海  汪亚平 《海洋通报》2019,38(6):640-649

河口物质输运、能量交换与底边界层内的水动力过程密切相关,底边界层参数(如切应力、拖曳系数)的确定至关重要。挪威Nortek公司生产的新型声学多普勒流速剖面仪AD2CP相比传统ADCP具有高频、低噪的优点,可用于高频(16Hz)流速剖面观测,而被广泛应用于底边界层观测的ADV只能测量单点高频流速。本文采用AD2CP在长江口南槽最大浑浊带区域进行座底式观测,并与同步近底部三脚架上ADV的观测结果进行对比。结果表明,使用AD2CP测得的近底部平均流速与ADV的测量结果吻合良好;使用惯性耗散法计算了底切应力,基于ADV的单点高频流速数据计算结果为2.16×10~(-2)～5.69×10~(-1)N/m~2,基于AD2CP的结果为2.09×10~(-2)～4.26×10~(-1)N/m~2,二者范围大致相当。在此基础上,基于AD2CP数据计算出摩阻流速为4.55×10~(-3)～2.06×10~(-2)m/s、底拖曳系数范围为1.84×10~(-4)～2.49×10~(-3),与ADV的计算结果基本一致。此外,由于AD2CP可以获得高频的流速剖面数据,优于单点ADV,具备观测近底部边界层参数和边界层内湍流剖面的潜力。  相似文献   

北祁连西段寒山金矿控矿构造及富集规律     

李生栋 《地质与勘探》2020,56(4):675-687

寒山金矿床产于北祁连西段加里东褶皱带北缘,区内矿产资源丰富,加强其控矿构造及矿化富集规律研究,对矿区勘查意义重大。通过野外调查及室内研究,发现矿区内赋矿地层为奥陶系阴沟群火山碎屑岩。矿区内褶皱构造及韧-脆性剪切带发育,联合控制了矿体的分布。韧-脆性剪切带发育在褶皱两翼,受层滑剪切系统控制。矿体产在背斜转折端及两翼韧-脆性剪切带内,呈楔形产出,向下迅速尖灭。研究认为,矿体主要富集在韧-脆性剪切带发育部位,矿体的富集程度与蚀变带规模正相关,靠近背斜转折端的位置为矿体富集地段,多阶段成矿作用同部位叠加构成富矿体。  相似文献   

高烈度区双洞隧道洞口段地震响应分析与振动台模型试验          下载免费PDF全文

皇民  苑俊杰  赵玉如  毕洁同  王松 《中国地质灾害与防治学报》2020,31(1):113-119

强震作用下,隧道地下结构损伤严重,其中洞口段更是抗震的薄弱环节,但其影响规律和特点目前尚缺乏系统的计算分析和研究。以强震区扯羊隧道为例,首先采用FLAC3D对双洞隧道洞口段地震响应进行分析,再用模型试验的方法进行洞口段模型试验,测量其地震响应应变规律,观测其震害发展情况,并与数值分析结果相互验证。结果表明:地震作用下,隧道仰拱横向位移较大;随着隧道埋深增加,内力逐步增加,其中墙角部位内力较大;洞口处隧道围岩在强震作用下会产生贯通性裂缝,影响隧道洞口稳定;地震作用下的明洞与暗洞交接处内力较大;地震作用下的双洞隧道之间存在较强的动力相互作用。  相似文献